Caple CM 107 Dokumentacja Pobierz pdf (Strona 4)

SG-231 MANUAL

SGC Inc. SGC Building, 13737 S.E. 26th St. Bellevue, WA. 98005 USA

P.O. Box 3526, 98009 Fax: (425) 746-6384 Tel: (425) 746-6310

E-Mail: sgc@sgcworld.com Website: www.sgcworld.com

Quick Start Guide

To quickly install your antenna coupler you will need the following:

1. An HF/VHF radio with 3 to 100 watts output.

2. An HF antenna with a wire feed (not coax fed).

Minimum length of 7 feet (to 3.5 MHz) or 23 feet (1.8 MHz).

3. A good ground (counterpoise) for the antenna and coupler.

4. +12 VDC and ground for the coupler.

5. SmartLock Pro coupler controller (optional).

Connections:

Connect the Smartuner as shown in the following diagram:

Orange : Option A

Violet : Option B

Brown: Not used

Blue : Reset

White : Hold (Locks coupler settings)

Green : Tuned Indicator

Black : DC Ground

Red : +12 to 15 VDC

To SmartLock

Pro optional

GROUND

(Counterpoise)

TO TRANSMITTER

(3 to 100 w)

ANTENNA

Single Wire

RG-58 COAX

Operation:

1. Turn on Radio. Apply +12 VDC power to the coupler.

2. As power is applied, coupler should make one “click” sound.

3. Coupler should come up in the bypass (un-tuned) state.

4. To tune, speak normally, whistle or use CW (CW is recommended).

5. Tuning should be done at full power. Clicking is heard.

6. When tuned, clicking stops and Green wire goes low.

1 2 3 4 5 6 7 8 9 ... 81 82

Brak uwag

Caple CM 107 Dokumentacja Strona 4