Caple C806C Instrukcja Obsługi Pobierz pdf (Strona 7)

PF2100

Modbus Card Instruction Manual v1.1

Jan 5, 2012

Page 3

Specifications and System Requirements

This manual was written for use with Modbus Cards that have the following model and version:

Model Number

1PS167

Hardware Version

/ v2.0

Firmware Version

v1.1

/ v2.0

PF2100 System Requirements

This input card is designed to be used only with PF2100 systems that meet the following requirements:

Door Card

Hardware Version

v1.6 or higher

Firmware Version

v1.6.3CE or higher

Terminal Card

Hardware Version

v1.61 or higher

Firmware Version

v1.6.3B or higher

To check your firmware version, do the following with the PF2100 powered on. Simultaneously hold both the Up and Down buttons on the keypad. The Door

Card firmware version (“DC”) must be v1.6.3CE or higher. If it is not, contact Profire to arrange for a firmware upgrade.

If your system uses a higher revision of firmware than those listed in the table above, the menu descriptions listed in this document may not be completely

accurate. In this case, please consult our website for a newer version of this manual.

Modbus Master Device Requirements

Modbus Master Devices (such as PLCs or computers) must be compatible with the Modbus Card specifications listed below. If the Master Device is not

compatible with one or more of these specs, it may still be possible to make the system work using a repeater or other converter device. For example, if the

Master Device only supports Modbus TCP, then a Modbus-TCP-to-Modbus-RTU Converter will allow the system to work as long as the Modbus RTU interface on

the converter is compatible with the specifications below.

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Komentarze do niniejszej Instrukcji

Brak uwag

Caple C806C Instrukcja Obsługi Strona 7

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Płyty grzewcze Caple C806C